How to Prevent UV Curing from Damaging Print Heads

Xaar 1003 inkjet printhead

With proper care & maintenance, inkjet printheads can last a long time.

When it comes to UV inkjet printing, reflective, transparent or glossy substrates do not always ‘play nice’. These substrates can be anything from glass and crystal to simply any type of shiny media that causes UV light to bounce back into the print heads. The problem with UV light reflecting back into the print head is that it results in curing the inks within the nozzles and on the nozzle plate itself. This can cause serious (and costly) damage to the print head and therefore shorten the life of the head unnecessarily.

The following are some tips on how to prevent UV curing from damaging print heads:

  1. Eliminate the use of refractive materials when manufacturing fixtures or printer jigs. When designing a fixture, be sure it is a dark matte finish material, and covers any negative space between parts to block UV light from bouncing back to the print heads.
  2. Consider the angle and intensity of the UV lamps. You should always use the lowest amount of UV possible to gain full cure for your application.  If your machine was not supplied with UV light shims, contact the technical service department to inquire about this feature.
  3. Always print onto substrates that are ‘flat’ or parallel to the head array, and be sure the platen gap is no larger than 1.5mm. If you happen to be printing on a mirrored substrate that is flexible, be sure to attach it to a flat material first.
  4. Be proactive and check the health of your nozzles frequently. Perform an auto cleaning every other platen and to ensure that all nozzles are working, run nozzle checks every hour of production. If you notice that ink is curing either in the nozzles or on the face plate, flush the affected head with maintenance fluid.
  5. Always perform ink nozzle checks at the end of a shift. If any nozzles are missing, clean your print heads before powering down the printer.

Prematurely damaged print heads (due to UV light refraction and reflection) are expensive and unnecessary. Follow the tips above to avoid this issue and ensure proper care and functionality of your inkjet printer.  For more on flushing systems, check out our Pantheon Flush Rigs.

Want to find out more about preventing UV curing from damaging your print heads? Drop us a line!

Fields marked with an asterisk are required.
This will enable us to direct your inquiry to the appropriate Sales Engineer.
Click or drag files to this area to upload.You can upload up to 3 files.
Upload an image file (optional)
Note: Under no circumstances will we sell, share or otherwise distribute your data outside EPS.